Hopefully "ScriptingTipsAndTricks" helps you with your batch file or vbscript scripting :-)\Windows CommandsSC.EXE (manage windows services)

---

SC.EXE (manage windows services)

SC.EXE -?

A bit of testing shows that "\"" should be used to escape double quotes where required.

DESCRIPTION:
        SC is a command line program used for communicating with the
        Service Control Manager and services.
USAGE:
        sc <server> [command] [service name] <option1> <option2>...


        The option <server> has the form "\\ServerName"
        Further help on commands can be obtained by typing: "sc [command]"
        Commands:
          query-----------Queries the status for a service, or
                          enumerates the status for types of services.
          queryex---------Queries the extended status for a service, or
                          enumerates the status for types of services.
          start-----------Starts a service.
          pause-----------Sends a PAUSE control request to a service.
          interrogate-----Sends an INTERROGATE control request to a service.
          continue--------Sends a CONTINUE control request to a service.
          stop------------Sends a STOP request to a service.
          config----------Changes the configuration of a service (persistent).
          description-----Changes the description of a service.
          failure---------Changes the actions taken by a service upon failure.
          failureflag-----Changes the failure actions flag of a service.
          sidtype---------Changes the service SID type of a service.
          privs-----------Changes the required privileges of a service.
          qc--------------Queries the configuration information for a service.
          qdescription----Queries the description for a service.
          qfailure--------Queries the actions taken by a service upon failure.
          qfailureflag----Queries the failure actions flag of a service.
          qsidtype--------Queries the service SID type of a service.
          qprivs----------Queries the required privileges of a service.
          qtriggerinfo----Queries the trigger parameters of a service.
          qpreferrednode--Queries the preferred NUMA node of a service.
          delete----------Deletes a service (from the registry).
          create----------Creates a service. (adds it to the registry).
          control---------Sends a control to a service.
          sdshow----------Displays a service's security descriptor.
          sdset-----------Sets a service's security descriptor.
          showsid---------Displays the service SID string corresponding to an arbitrary name.
          triggerinfo-----Configures the trigger parameters of a service.
          preferrednode---Sets the preferred NUMA node of a service.
          GetDisplayName--Gets the DisplayName for a service.
          GetKeyName------Gets the ServiceKeyName for a service.
          EnumDepend------Enumerates Service Dependencies.

        The following commands don't require a service name:
        sc <server> <command> <option>
          boot------------(ok | bad) Indicates whether the last boot should
                          be saved as the last-known-good boot configuration
          Lock------------Locks the Service Database
          QueryLock-------Queries the LockStatus for the SCManager Database
EXAMPLE:
        sc start MyService

Would you like to see help for the QUERY and QUERYEX commands? [ y | n ]:


QUERY and QUERYEX OPTIONS:
        If the query command is followed by a service name, the status
        for that service is returned.  Further options do not apply in
        this case.  If the query command is followed by nothing or one of
        the options listed below, the services are enumerated.
    type=    Type of services to enumerate (driver, service, all)
             (default = service)
    state=   State of services to enumerate (inactive, all)
             (default = active)
    bufsize= The size (in bytes) of the enumeration buffer
             (default = 4096)
    ri=      The resume index number at which to begin the enumeration
             (default = 0)
    group=   Service group to enumerate
             (default = all groups)

SYNTAX EXAMPLES
sc query                - Enumerates status for active services & drivers
sc query eventlog       - Displays status for the eventlog service
sc queryex eventlog     - Displays extended status for the eventlog service
sc query type= driver   - Enumerates only active drivers
sc query type= service  - Enumerates only Win32 services
sc query state= all     - Enumerates all services & drivers
sc query bufsize= 50    - Enumerates with a 50 byte buffer
sc query ri= 14         - Enumerates with resume index = 14
sc queryex group= ""    - Enumerates active services not in a group
sc query type= interact - Enumerates all interactive services
sc query type= driver group= NDIS     - Enumerates all NDIS drivers

SYNTAX: SC.EXE failure

DESCRIPTION:
        Changes the actions upon failure
USAGE:
        sc <server> failure [service name] <option1> <option2>...

OPTIONS:
        reset=   <Length of period of no failures (in seconds)
                  after which to reset the failure count to 0 (may be INFINITE)>
                  (Must be used in conjunction with actions= )
        reboot=  <Message broadcast before rebooting on failure>
        command= <Command line to be run on failure>
        actions= <Failure actions and their delay time (in milliseconds),
                  separated by / (forward slash) -- e.g., run/5000/reboot/800
                  Valid actions are <run|restart|reboot> >
                  (Must be used in conjunction with the reset= option)

SYNTAX: SC.EXE config

DESCRIPTION:
        Modifies a service entry in the registry and Service Database.
USAGE:
        sc <server> config [service name] <option1> <option2>...

OPTIONS:
NOTE: The option name includes the equal sign.
      A space is required between the equal sign and the value.
 type= <own|share|interact|kernel|filesys|rec|adapt>
 start= <boot|system|auto|demand|disabled|delayed-auto>
 error= <normal|severe|critical|ignore>
 binPath= <BinaryPathName>
 group= <LoadOrderGroup>
 tag= <yes|no>
 depend= <Dependencies(separated by / (forward slash))>
 obj= <AccountName|ObjectName>
 DisplayName= <display name>
 password= <password>

SYNTAX: SC.EXE create

DESCRIPTION:
        Creates a service entry in the registry and Service Database.
USAGE:
        sc <server> create [service name] [binPath= ] <option1> <option2>...

OPTIONS:
NOTE: The option name includes the equal sign.
      A space is required between the equal sign and the value.
 type= <own|share|interact|kernel|filesys|rec>
       (default = own)
 start= <boot|system|auto|demand|disabled|delayed-auto>
       (default = demand)
 error= <normal|severe|critical|ignore>
       (default = normal)
 binPath= <BinaryPathName>
 group= <LoadOrderGroup>
 tag= <yes|no>
 depend= <Dependencies(separated by / (forward slash))>
 obj= <AccountName|ObjectName>
       (default = LocalSystem)
 DisplayName= <display name>
 password= <password>

SYNTAX: SC.EXE sdshow

DESCRIPTION:
        Displays a service's security descriptor in SDDL format
USAGE:
        sc <server> sdshow <service name> <showrights>

SYNTAX: SC.EXE sdset

DESCRIPTION:
        Sets a service's security descriptor
USAGE:
        sc <server> sdset <service name> <SD in SDDL format>

EXAMPLE - Set Service Recovery Options

And yes there really are spaces after the equal sign (amazing)... Didn't it take me ages to work out how to do this!

sc.exe failure MyService reset= 240 actions= restart/5000/restart/60000/restart/600000

Please email me any feedback, additional information or corrections. See this page online (look for updates) ScriptingTipsAndTricks© is (C)opyright Dennis Bareis 2003-2008 (All rights reserved). Sunday September 07 2014 at 12:50pm Visit ScriptingTipsAndTricks's Home Page